产品搜索
在线客服
 工作时间
周一至周五 :8:30-17:30
周六至周日 :9:00-17:00
联系方式

联系人:冀柏宏

电 话:

(+86)0314-2266829

手  机:

(+86)18831479808  

(+86)13191633902  

微信:18831479808

邮 箱:btsdyb@163.com

地 址:河北省承德技术产业开发区上板城镇卸甲营村


扫描查看手机版网站

产品详情
GWE管材弯曲试验机
分享到:
GWE管材弯曲试验机 
产品详情

塑料管材弯曲试验机

用途                                                                              
塑料管材弯曲试验机适用于绝缘电工套管等材料的弯曲试验,弯曲的总角度为180,试验后观察试样有无裂痕。符合:GB/T14823.2《电工安装用导管特殊要求刚性绝缘材料平导管》、JG/3050-1998《建筑用绝缘电工套管及配件》及ZBG33008《聚氯乙烯塑料波纹电线管》等要求. 本试验机能在一台设备上测试标准规定的三种导管,不需要更换成形模及弯曲型锟。且操作方便、直观可靠,因此,应用愈来愈广。
塑料管材弯曲试验机技术参数: GWE
1、 试样导管直径:16mm 20mm 25mm
2、成形模槽底半径:48mm 60mm 75mm
3、弯曲型锟中心轨迹半径:84mm 10mm 131.25mm
4、成形模及弯曲型锟槽半径:8.1mm 10.1mm 12.6mm
5、弯曲型锟槽底直径:24mm 30mm 37.5mm
6、试样弯曲总角度:180
7、外形尺寸350×320×850
8、重量: 30Kg

Plastic pipe bending machine
use
Such as plastic pipe bending machine is suitable for electrical insulation casing material bending test, bending Angle of total was $180, after test observation samples with and without cracks.: GB/T14823.2 the electricians install flat tube with catheter special request rigid insulation materials ", JG / 3050-3050 "building electrical insulation casing and accessories" and ZBG33008 PVC plastic corrugated wire and tube and other requirements. This trial function on one device test standard stipulated by the three types of catheter, do not need to change the forming mold and curved kun.And easy to operate, intuitive and reliable, therefore, more and more widely used.
Plastic tubing bending machine technical parameters:
1, sample tube diameter 16 mm: 20 mm to 25 mm
2, forming die radius of the bottom of the channel: 48 mm 60 mm to 75 mm
3, kun center track curved radius: 10 mm to 131.25 mm 84 mm
4, forming die and curved kun chamfer radius: 8.1 mm to 10.1 mm to 12.6 mm
5, kun curved groove bottom diameter: 24 mm to 30 mm to 37.5 mm
6, specimen bending Angle: 180
7, appearance size 350 * 320 * 320
8, weight: 30 kg