产品搜索
在线客服
 工作时间
周一至周五 :8:30-17:30
周六至周日 :9:00-17:00
联系方式

联系人:冀柏宏

电 话:

(+86)0314-2266829

手  机:

(+86)18831479808  

(+86)13191633902  

微信:18831479808

邮 箱:btsdyb@163.com

地 址:河北省承德技术产业开发区上板城镇卸甲营村


website qrcode

扫描查看手机版网站

产品详情
分享到:
XGY-10/20万博manbetx水晶宫_万博manbetx在线登录-万博下载 
编号:
A003
价格:
300
产品详情

XGY-10/20万博manbetx水晶宫_万博manbetx在线登录-万博下载/管材爆破试验机

   数显表控制,触摸屏控制,计算机控制,等多种控制方式。运行安全可靠,实用性强。管道耐压专业检测设备。可以提供 中文 英文 法文 俄文等多种操作系统,用于出口。

万博manbetx水晶宫_万博manbetx在线登录-万博下载/管材爆破试验机简介:

  万博manbetx水晶宫_万博manbetx在线登录-万博下载是根据GB/T6111—2018《流体输送用热塑性塑料管材耐内压试验方法》以及GB/T15560《流体输送用塑料管材液压瞬时爆破和耐压试验方法》标准的要求而设计、生产的,用于测定热塑性管材、复合管材(如PP—R、PP—B、PP—A、PE、PE—X、PVC、PVC—U、PVC—C及铝塑复合管等各种管材)在长时间恒定内压和恒定温度下的耐压破坏时间或瞬时爆破的最大压力值,是塑料管材生产厂商及检测机构必备的检测设备。此设备能够充分体现企业的产品质量的水平。

万博manbetx水晶宫_万博manbetx在线登录-万博下载/管材爆破试验机符合标准:

GB/T6111—2018《流体输送用热塑性塑料管材耐内压试验方法》

GB/T15560—1995《流体输送用塑料管材液压瞬时爆破耐压试验方法》

GB/T18742.1—2017冷热水用聚丙烯管道系统 第1部分: 总则

GB/T18742.2—2017《冷热水用聚丙烯管道系统 第2部分:管材

GB/T18742.3—2017冷热水用聚丙烯管道系统 第3部分:管件》

GB/T13663.1—2018《给水用聚乙烯(PE)管道系统 第1部分:总则》

GB/T13663.2-2018给水用聚乙烯(PE)管道系统 第2部分:管材

GB/T13663.3-2018给水用聚乙烯(PE)管道系统 第2部分:管件

GB/T15558.1—2015《燃气用埋地聚乙烯(PE)管道系统 第1部分:管材》

GB/T18992.1—2003《冷热水用交联聚乙烯管道系统总则》

GB/T18992.2—2003《冷热水用交联聚乙烯管道系统管材》

GB/T10002.1—2006《给水用硬聚氯乙烯(PVC—U)管材》

GB/T10002.2—2003《给水用硬聚氯乙烯(PVC—U)管件》

GB/T18993.1—2003《冷热水用氯化聚氯乙烯管道系统》

GB/T18993.2—2003《冷热水用氯化聚氯乙烯管道系统》

GB/T18992.1—2003《冷热水用氯化聚氯乙烯管道系统管件》

GB/T18997.1—2003《铝塑复合压力管铝管搭接焊式铝塑管》

GB/T18997.2—2003《铝塑复合压力管铝管对接焊式铝塑管》

ISO 1167、GB/T 6111-2018、GB/T15560、ASTM D1598、ISO 9080、GB/T 18252、CJ/T108-2015和ASTM F1335等标准要求。

万博manbetx水晶宫_万博manbetx在线登录-万博下载/管材爆破试验机主要技术参数:

1、(1-100路)独立控制试验压力和试验时间

2、加压范围:0—10MPa/20MPa

3、最高工作压力10MPa/20MPa

4、高压柱塞泵

(1)压力:20MPa

(2)流量:251L/min

(3)转速:1450rpm/min

5、控压精度:试验压力值上限的+2%,下限的-1%(可根据要求设定)

6、压力值分辨率:0.001MPa

7、压力传感器:试验压力采样频率0.1秒

8、控温范围: 室温-95℃   20—95(配制冷)

9、控温精度:平均温差±0.5℃,最大偏差±0.5℃

10、计时范围:0.001—9999h

11、计时精度:1s

12、水箱加热功率:9kW

13、主机电源:380VAC/220VAC混用(三相四线制)

万博manbetx水晶宫_万博manbetx在线登录-万博下载/管材爆破试验机技术特点:

①本项目设备可以自动控制,无须手动调整,方便快捷。

②本项目设备每路由三个电磁阀独立控制,一路控制管内高压液体的大流量,实现快速打压。一路控制管内高压液体的小流量,慢速补压。还有一路慢速卸压。这样就改变以往流量小,打压速度慢的缺点,彻底改变由一路控制的局面,大大提高了试验数据的准确性。

③预热时间长这是行内该设备普遍存在的问题,本项目中的设备采用恒温介质水,使高压管内的水与浸泡达到一定时间水箱内的水,水温一致,使试验节省时间,达到理想数据。

④多路分控改变以往一路单控的局面,为客户提供更大的试验空间。

⑤所有试验数据由PLC控制,自动设定,自定计算,所有压力都具有压力保持,使试验数据更加精确和稳定。

管材夹具部分为国标GB/T6111中的(A)型夹具   

不锈钢夹具 (2).png


不锈钢304材质夹具   碳钢材质可供选择


操作简单 密封效果好 管材耐压封头 管材静液压夹具


管材静液压爆破试验机夹具规格可根据厂家需要选配(价格另议)


   

Φ16、Φ20、Φ25、Φ32、Φ40、Φ50、Φ63、Φ75、Φ90、Φ110、


   Φ125、Φ140、Φ160、Φ180、Φ200、Φ225、Φ250、Φ315、Φ350


Φ400、Φ450、Φ500、Φ560、Φ630、Φ710  Φ800   Φ900   Φ1000   Φ1200   Φ1400   


Φ1600、Φ1800   Φ2000

Xgy-10 / 20 hydrostatic testing machine / bursting testing machine

Digital display control, touch screen control, computer control, etc. It is safe, reliable and practical. Professional pipeline pressure testing equipment. It can provide Chinese, English, French, Russian and other operating systems for export.

Brief introduction of hydrostatic testing machine / bursting testing machine:

The hydrostatic testing machine for pipes is designed and manufactured in accordance with the requirements of GB / t6111-2018 test method for internal pressure resistance of thermoplastic pipes for fluid transportation and GB / t15560 test method for hydraulic instantaneous explosion and pressure resistance of plastic pipes for fluid transportation. It is used for the determination of thermoplastic pipes and composite pipes (such as PP-R, PP-B, pp-a, PE, PE-X, PVC, PVC-U, PVC-C It is the necessary testing equipment for plastic pipe manufacturers and testing institutions, which can withstand the pressure damage time or the maximum pressure value of instantaneous blasting under long-term constant internal pressure and constant temperature. This equipment can fully reflect the level of product quality of the enterprise.

Hydrostatic testing machine / bursting testing machine for pipes shall conform to the following standards:

GB / t6111-2018 test method for internal pressure resistance of thermoplastic pipes for fluid transportation

GB / t15560-1995 pressure test method of plastic pipe for fluid transportation by hydraulic instantaneous blasting

Polypropylene piping systems for hot and cold water part 1: General rules (GB / t18742.1-2017)

Polypropylene piping systems for hot and cold water part 2: pipes (GB / t18742.2-2017)

Polypropylene piping systems for hot and cold water part 3: pipe fittings (GB / t18742.3-2017)

Polyethylene (PE) piping systems for water supply part 1: General rules (GB / t13663.1-2018)

Polyethylene (PE) piping systems for water supply part 2: pipes (GB / t13663.2-2018)

Polyethylene (PE) piping systems for water supply part 2: pipe fittings (GB / t13663.3-2018)

GB / t15558.1-2015 buried polyethylene (PE) pipeline system for gas Part 1: Pipes

GB / t18992.1-2003 general rules for cross linked polyethylene piping systems for hot and cold water

GB / t18992.2-2003 cross linked polyethylene pipe system for hot and cold water

Unplasticized polyvinyl chloride (PVC-U) pipes for water supply (GB / t10002.1-2006)

Unplasticized polyvinyl chloride (PVC-U) pipe fittings for water supply (GB / t10002.2-2003)

Chlorinated polyvinyl chloride piping systems for hot and cold water (GB / t18993.1-2003)

Chlorinated polyvinyl chloride piping systems for hot and cold water (GB / t18993.2-2003)

Chlorinated polyvinyl chloride pipe system fittings for hot and cold water (GB / t18992.1-2003)

GB / t18997.1-2003 aluminum plastic composite pressure pipe aluminum pipe lap welded aluminum plastic pipe

GB / t18997.2-2003 aluminum plastic composite pressure pipe aluminum pipe butt welded aluminum plastic pipe

ISO 1167, GB / T 6111-2018, GB / t15560, ASTM d1598, ISO 9080, GB / T 18252, CJ / t108-2015 and ASTM f1335.

Main technical parameters of hydrostatic tester / bursting tester:

1. (1-100 routes) independently control the test pressure and test time

2. Pressure range: 0-10mpa / 20MPa

3. Maximum working pressure 10MPa / 20MPa

4. High pressure plunger pump

(1) pressure: 20MPa

(2) flow: 251l / min

(3) speed: 1450rpm / min

5. Pressure control accuracy: 2% of the upper limit and - 1% of the lower limit of the test pressure value (can be set according to the requirements)

6. Resolution of pressure value: 0.001mpa

7. Pressure sensor: test pressure sampling frequency 0.1s

8. Temperature control range: room temperature - 95 ℃ 20-95 ℃ (cold preparation)

9. Temperature control accuracy: average temperature difference ± 0.5 ℃, maximum deviation ± 0.5 ℃

10. Timing range: 0.001-9999h

11. Timing accuracy: 1s

12. Heating power of water tank: 9kw

13. Host power supply: 380VAC / 220VAC mixed (three-phase four wire system)

Technical features of hydrostatic testing machine / bursting testing machine for pipes:

① the equipment of the project can be controlled automatically without manual adjustment, which is convenient and fast.

② the equipment of the project is independently controlled by three solenoid valves, one of which controls the large flow of high-pressure liquid in the pipe to achieve rapid pressure. One way to control the small flow of high-pressure liquid in the pipe and make up pressure slowly. There is also a slow way to relieve pressure. In this way, the shortcomings of small flow and slow pressure are changed, and the situation controlled by one way is completely changed, and the accuracy of test data is greatly improved.

③ long preheating time is a common problem of the equipment in the industry. The equipment in this project adopts constant temperature medium water to make the water in the high-pressure pipe and the water in the water tank soaked for a certain time, and the water temperature is the same, so that the test can save time and reach the ideal data.

④ the multi-channel sub control changes the situation of single control in the past and provides more test space for customers.

⑤ all test data are controlled by PLC, set automatically and calculated automatically. All pressures are maintained to make the test data more accurate and stable.

The pipe clamp part is the (a) type clamp in GB / t6111.

Stainless steel clamp (2). Png

Stainless steel 304 material fixture carbon steel material available

Simple operation, good sealing effect, pipe pressure head, pipe hydrostatic fixture

The specification of the fixture of hydrostatic bursting test machine can be selected according to the needs of the manufacturer (the price will be discussed separately)

Φ 16, Φ 20, Φ 25, Φ 32, Φ 40, Φ 50, Φ 63, Φ 75, Φ 90, Φ 110,

Φ 125, Φ 140, Φ 160, Φ 180, Φ 200, Φ 225, Φ 250, Φ 315, Φ 350

Φ 400, Φ 450, Φ 500, Φ 560, Φ 630, Φ 710 Φ 800 Φ 900 Φ 1000 Φ 1200 Φ 1400

Φ 1600, Φ 1800, Φ 2000, etc.